Skip Menu. Navigate to content in this page
Accessibility Assistance, opens A D A page
top of page
  • Writer's pictureTeamBay

How to Float Your MetalPrint in Seconds with our Top Two Hanging Options

Updated: Aug 23



The nature of MetalPrints is that they are beautifully simple, showcasing a modern elemental style. Starting with a .045" thick sheet of aluminum, their minimalist design spotlights the thin, exposed edge when floated from the wall. Our default Float Mount Hanger and aluminum Inset Frame are the two most popular ways to create this floating effect. Scroll on to see just how easy it is to install your MetalPrint with these two hanging options.


 


Float Mount Hanger

Our Float Mount Hanger is the default hanging option for MetalPrints, and for good reason! Attached to the back of the print, it's lightweight and floats the print 1/2" off the wall when hung. A sawtooth hanger makes it quick and easy to mount your MetalPrint with no need for a frame. Float Mount Hangers are available on MetalPrints from 4x4" to 24x36".


 


Inset Frame

Aluminum Inset Frames are a great alternative to our Float Mount Hangers. Inset Frames are recessed from the edges of the print, so the print appears to float away from the wall when hung. Inset Frames come in your choice of 3/4" or 1-1/4" depth, and a French Cleat or Wire Hanger. While 3/4" Insets are silver, 1-1/4" Insets are offered in silver or black. Available for sizes 8x8" to 48x96".


An additional Security T-Screw is available for Inset Frames with French Cleat, which provides extra safeguarding for your MetalPrint. Acting as a special key, the T-Screw locks your Inset Frame to the wall - perfect for commercial displays in public locations like hospitals, restaurants, galleries, and more.






 


To Learn More About MetalPrints, Visit

www.bayphoto.com/metalprints


 


View Our Current Specials!



2,899 views0 comments
bottom of page